New At Daltec

HIGH PRESSURE TWO-STAGE FANS (03-9474)


Model: DBCP 360-2 SW Series 38, Class 35K, Arrangement 7

Application: Floatation Cell Blower

Performance: Flow – 10000 cfm
Static Pressure – 147 inches w.g.
Speed – 3550 rpm
Power - 325 bhp
Temperature – 70 degF

Features: 2 x 36” Backward Curved Impellers mounted on a common shaft
Inlet Boxes
Crossover Duct
Fully Insulated and Clad Housing
Outlet Damper with Proportioning Electric Actuator
Shaft Seals
OSHA Bearings. Shaft and Coupling Guards
Fully Unitary Base
Access Doors
Split Casing
350HP/3600RPM TEFC Motor, mounted by others

INDUCED DRAFT FANS (02-8770)




Model: DSTA 1028 Series 3080, SWSI, Class 25K, Arrangement 3

Application: ID Fans on a Steel Mill Dust Collection System

Performance: Flow - 330000 m3/hr
Static Pressure – 87 mbar
Speed – 870 rpm
Power – 900 kW/900 RPM Motor
Temperature - 65 degC

Features: 103” diameter single thickness airfoil impeller
Inlet and Outlet Flanges
Raised Type Access Doors in Casing and Box
Inlet Box Damper (actuator supplied and mounted by others)
Falk T10 Drive Coupling
Split Casing
Insulation Pins for on-site application of insulation and cladding
Independent Bearing Pedestals with integral Motor Base
Full Quality Assurance Documentation

HIGH PRESSURE BLOWER FOR INDIA (03-9289)



Model: DRBO 1120 Series 13, SWSI , Class 40K, Arrangement 8

Application: ID Fan in a Steel Mill Acid Regeneration Plant

Performance: Flow - 15150 m3/hr
Static Pressure – 1500 mm wg
Speed – 2950 rpm
Power – 96.8 BkW
Temperature - 87 degC

Features: ¾” FRP Casing in Derakane 470-36 Premium Resin with C-Veil Corrosion Barrier.
Impeller in Grade 7 Palladium Stabilized Titanium Construction
Oil Lubricated Bearings with constant oilers and thermocouples
Flanged Inlet and Outlet
Metrix Vibration Sensor
Falk T10 Drive Coupling
Split Casing
3 part Epoxy Paint on all mild steel components
150HP/3Ph/50Cy//415V/3000RPM TEFC Inverter Duty Motor
Full mechanical run test prior to shipment
Full Quality Assurance Documentation

18 ROOF EXHAUST FAN FOR STEEL MILL (04-9704)

Model: UBRE-48 Arrangement 4 Roof Exhaust Fan

Application: Exhausting new Rolling Mill in a Steel Plant

Performance: Flow – 33333 cfm
Static Pressure – 0.25” water gauge
Speed – 870 rpm
Power – 4.6 bhp
Temperature - 70?F

Features: Rated and tested to 67 dBA at 10ft.
Integral Silencer in Windband
Hinged Oversize Access Door for motor removal
Backdraft Damper
NEMA 3R Lockable Disconnect switch
Cast Aluminum Adjustable Pitch Impeller
Fabricated Roof Curb suitable for sloped roof
High Efficiency Anti Rust Finish
5HP/900 RPM TEAO, Premium Efficiency Motor